Premium diamond micro-powder
1 use domestic top-quality single-crystal diamond material as raw materials . Technical date such as abrasives performance ,static pressure strength and thermal stability is much higher than standard of industry .
2 round and smooth crystal , no bar or plate-shape particles , fewer particles absorbed on the surface of the diamond .
3 extremely arrow range of granularity distribution ,excellent granularity control
4 special techniques enable the content of impurity to be about 1-100000
recommended application:
The product application in industry that have high demand on grinding and polishing, such as precision equipment industry , as we as the in sectors that strict with the content of impurity , like electroplate and production of the pollycrystcalline diamond compacts
EDM - Economical grade diamond Micro-powder
1 complete form of crystal with shape edges, hard and crisp texture , extremely powerful grinding , good thermal stability .
2 content of impurity is satisfied with standard.
3 even granularity distribution , granularity control is satisfied with standard
Recommended application
The products demonstrate extremely high powerful grinding efficiency in sectors where requirement on strength and accuracy are not high , like production of diamond grinding wheel and polishing of stone materials
河南省亚龙超硬材料有限公司微粉标准对照表 |
国际标准 |
中国标准 |
日本标准 |
MV |
D10 |
D50 |
D90 |
0-0.25 |
W0.25 |
60000# |
0.19-0.22 |
0.11-0.14 |
0.18-0.20 |
0.33-0.35 |
0-0.5 |
W0.5 |
30000# |
0.28-0.30 |
0.16-0.18 |
0.25-0.27 |
0.38-0.45 |
0-1 |
W1 |
15000# |
0.50-0.80 |
0.45-0.55 |
0.55-0.75 |
0.70-0.90 |
0.5-1.5 |
W1.5 |
12000# |
0.75-1.00 |
0.50-0.80 |
0.80-1.00 |
1.50-1.80 |
0-2 |
W1.5 |
10000# |
0.90-1.10 |
0.70-0.85 |
0.90-1.00 |
1.20-1.50 |
1-2 |
W2 |
8000# |
1.00-1.05 |
0.80-1.00 |
1.30-1.60 |
1.80-2.00 |
1-3 |
W2.5 |
6000# |
1.90-2.10 |
1.45-1.55 |
1.80-2.00 |
2.30-2.60 |
2-3 |
W3 |
5000# |
2.30-2.50 |
1.50-1.80 |
2.10-2.40 |
2.80-3.10 |
2-4 |
W3.5 |
4000# |
2.70-3.00 |
1.80-2.10 |
2.60-2.80 |
3.50-3.90 |
3-5 |
W5 |
3000# |
3.80-4.00 |
2.50-2.80 |
2.80-3.20 |
5.00-5.50 |
4-6 |
W6 |
2500# |
4.80-5.00 |
3.00-3.50 |
4.20-4.70 |
6.30-6.80 |
4-8 |
W7 |
2000# |
5.80-6.00 |
4.10-4.60 |
5.50-5.80 |
7.00-7.80 |
5-10 |
W10 |
1500# |
7.00-7.50 |
5.00-5.30 |
6.90-7.30 |
9.00-10.00 |
6-12 |
W10+ |
1200# |
8.20-8.50 |
5.80-6.50 |
7.00-8.00 |
9.50-11.50 |
8-15 |
W14 |
1000# |
9.50-12.00 |
7.50-8.30 |
9.00-11.00 |
12.50-14.50 |
10-20 |
W20 |
800# |
13.00-16.00 |
9.50-12.00 |
12.00-15.00 |
18.00-20.00 |
15-25 |
W25 |
700# |
18.00-20.00 |
14.00-15.00 |
17.50-19.00 |
23.00-26.00 |
20-30 |
W28 |
500# |
22.50-25.00 |
17.00-19.00 |
22.00-24.00 |
30.00-33.00 |
25-35 |
W35 |
450# |
28.00-30.00 |
20.00-23.00 |
25.00-27.00 |
33.00-36.00 |
30-40 |
W40 |
400# |
32.00-35.00 |
23.00-26.00 |
30.00-34.00 |
40.00-43.00 |
40-50 |
W50 |
380# |
42.00-45.00 |
30.00-34.00 |
40.00-43.00 |
55.00-58.00 |
40-60 |
W55 |
370# |
45.50-50.50 |
35.00-38.00 |
45.00-48.00 |
60.00-63.00 |
50-60 |
W60 |
350# |
53.00-55.00 |
38.00-41.00 |
51.00-53.00 |
68.00-73.00 |
|
|
|
|
|
|
|
说明:1、本表格数据最终解释权归亚龙公司所有; |
2、D10,D50,D90值可根据客户要求定制。 |